C0625
Variable Effort Steering Sensor Circuit Range/Performance
Here the sensor signal is electrically present but its content does not add up. With an incremental steering wheel sensor the module derives rate or angle from pulse counts; a Ford patent computes steering rate from the counts in a fixed sampling window, so lost pulses give a wrong rate. A Kelsey-Hayes patent on a two-channel sensor checks after each dropout whether the newly learned zero has moved by more than about 15° and then reports a shift fault; levels that sit between the valid low and high bands are rejected too. No maker publishes C0625 for steering. On GM vehicles the number turns up in PIP5094 (2014 and older) and among suspension-related codes in PIT5307G for 2014–2019 trucks, an older and unrelated use.
Possible causes
- Dirt or damage on the encoder disc causing lost pulses medium
- Intermittent contact at the connector producing short dropouts medium
- Sensor loose or misaligned after column or steering work medium
- Implausible road speed input used for the cross-check low
Symptoms
- Steering effort changes unexpectedly while turning
- Variable assist switched off with a fixed steering feel
- Steering or stability warning on some vehicles
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0625
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.