C0622
Variable Effort Steering Lock/Safety Actuator Control Circuit High
C0622 is the critical direction for a fail-safe lock: the actuator line reads high even when the controller wants it off. Since the lock in these designs releases when powered, a line shorted to battery voltage would keep it open when it should engage, so the safety path no longer works. Continental's superimposed steering unit, for example, stays open while powered and only blocks the planet carrier once power is gone, after which the normal steering gear still steers the car. JTEKT varies the holding duty with battery voltage to keep the coil cool. Controllers that detect a stuck-high line therefore shut the variable function down. No maker documents C0622 publicly.
Possible causes
- Lock solenoid wire shorted to a battery-fed circuit high
- Drive transistor in the module stuck on medium
- Charging system overvoltage low
Symptoms
- Steering system warning; variable function switched off
- No noticeable change in normal steering
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C0622
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.