C0620
Variable Effort Steering Lock/Safety Actuator Control Circuit/Open
Some steering systems that vary effort or ratio carry a second actuator whose only job is safety: a solenoid lock that blocks the motor or gear so the wheel turns the wheels directly. Delphi's patent combining Magnasteer with an active steering actuator uses a solenoid that is energised to unlock and drops into lock without power; JTEKT and Continental lock their superimposed steering the same fail-safe way. C0620 means this lock's circuit is open, so the unit cannot release and the variable function stays off. No maker publishes C0620 in this sense. On 2014–2019 GM trucks C0620 appears among suspension codes in PIT5307G, an older, unrelated assignment.
Possible causes
- Connector to the lock solenoid unplugged or corroded high
- Open lock solenoid coil, for example after overheating medium
- Broken wire between the steering module and the lock medium
Symptoms
- Variable steering function disabled; steering works with a fixed characteristic
- Steering system warning
- Possible click or no click from the steering when switching on
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C0620
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.