OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C061C

Variable Effort Steering Actuator Control Circuit/Open

Variable effort steering changes how hard a hydraulic system steers with road speed. In GM's Magnasteer a coil and permanent magnets on the rotary valve add or subtract from the torsion bar's stiffness; the GM and Steering Solutions patent EP2028081B1 describes this actuator, and ±3 A coil current is cited in a later patent. Ford's older variable-assist systems used a stepper-driven or solenoid orifice instead. C061C means the actuator circuit is open: the controller drives it but no current flows. Coil resistance should be about 2 ohms; an open reading means a new rack, as the coil is not serviceable. GM used its own C1241 for this. No maker publishes C061C. Expect light steering at speed or heavy steering when parking.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 1C

Possible causes

  • Connector at the steering gear loose, corroded or soaked with fluid high
  • Open actuator coil inside the steering gear medium
  • Broken wire between control module and steering gear medium

Symptoms

  • Steering effort no longer changes with speed
  • Heavier steering when parking or lighter, nervous steering on the highway
  • Steering or stability warning on some vehicles

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C061C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication