C061B
ECM Request - Forced Traction Control Disable
C061B is not a brake fault at all. It records that the engine control module told the brake module to switch traction control off, usually because the engine can no longer cut torque on demand. A Hyundai patent spells out the logic: the TCS asks for a torque cut over CAN, the engine reports the torque it delivers, and if the gap stays outside ±10 % too often, TCS is turned off and a warning lamp lit. GM handled this with its own codes: PIC4740C lists C0242 ECM Indicated TCS Malfunction next to C0561, and PIT4169F tells technicians that the PCM usually holds a code too, possibly without a check engine lamp, and not to replace the EBCM. Fix the engine fault first. No maker documents C061B publicly.
Possible causes
- Engine misfire or other engine fault that blocks torque reduction high
- Electronic throttle or torque model fault stored in the ECM medium
- Corrupt or missing torque messages between engine and brake module medium
- ECM software issue setting the disable request without a real fault low
Symptoms
- Traction control off lamp or Service Traction Control message
- Stability control may also be unavailable
- Engine codes stored, sometimes with the check engine lamp
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C061B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.