C0619
Brake Pedal Position Sensor A Offset Exceeded Learning Limit
Pedal position sensors are taught their rest value, and C0619 says the offset found for channel A lies outside the band the controller will accept. A Hitachi patent on electric boosters learns the stroke sensor zero only with the pedal released and no brake request, and treats a zero beyond a prescribed range as a sensor fault. Mitsubishi's 2023 Outlander PHEV maps C18EE-96 (abnormal stroke sensor value) to C0619, with MIL and brake warnings after two trips; boost, regenerative braking and automatic braking stop. GM's PIT5206D shows the field side: a wiring dropout made the ECM learn 0.61 V instead of about 1 V, so it saw the brake applied. GM relearns after any sensor or module service (16-NA-155).
Possible causes
- Intermittent connection in the sensor circuit that skewed the learned value high
- Pedal not returning fully (floor mat, stiff pivot, wrong adjustment) medium
- Sensor drifted or fitted out of position after replacement medium
- Learn procedure skipped or disturbed after sensor or module service low
Symptoms
- Brake or brake system warning lamp; check engine lamp on some vehicles
- Brake lights, cruise control or shifting behave as if the pedal were pressed
- Reduced brake assist or regenerative braking on electrified models
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0619
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.