OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0616

Park Brake Control Module Control Circuit Performance

C0616 is the one code in this range that GM really uses. Its 2025 EBCM tables file over twenty parking brake self-tests under it, all Type C without MIL: the left and right H-bridge supplies may not differ by more than 12 % at 8–20 V, the current measuring path must read 10.5–17 A in its self-test, the motor voltage must stay between 7 and 18 V for 700 ms, plus watchdog, ASIC and rollaway checks. The 2019 tables for the L3B engine list C0616 for an ADC reference fault in the EBCM as Type A with MIL. Bulletin 24-NA-122 traces a parking brake warning on 2024 Silverado and Sierra HD trucks to EBCM software; the fix is reprogramming, not a new module. Mitsubishi reports similar faults as C10B3.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 16

Possible causes

  • Software anomaly in the brake module (GM 2024 HD trucks, fixed by reprogramming) high
  • Weak battery, poor ground or charging fault pushing motor voltage outside its window medium
  • Internal hardware fault in the parking brake ASIC, bridge or measuring path medium
  • Parking brake assembly check not completed after module replacement low

Symptoms

  • Service Parking Brake message in the driver information center
  • Parking brake warning lamp; parking brake may be inhibited
  • Check engine lamp on some GM models

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0616

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication