C0615
Park Brake Control Module Control Circuit/Open
C0615 points at the circuit that feeds or enables the parking brake control electronics, not at a single caliper: it reads as open. Today the parking brake logic often runs as a software block inside the ESC unit (VDA recommendation 305-100), while the host supplies the motor power stage; a few cars keep a separate module. GM's EBCM tables for 2025 trucks show what such a check looks for, filed under C0616: if the motor supply line stays below 2 V for 500 ms during an apply or release, the clamp 30 feed counts as open. Mitsubishi sets C10B7-16 when the feed falls to 10 V or less. No maker publishes C0615 with this meaning; on 2014–2019 GM trucks C0615 is listed beside ride control codes in PIT5307G, which reflects an older GM assignment.
Possible causes
- Blown fuse or fusible link in the parking brake power feed high
- Loose or corroded terminal on the power or enable line at the module medium
- Broken wire between fuse box and module medium
- Internal fault in the module's supply stage low
Symptoms
- Electric parking brake inoperative on both sides
- Parking brake warning lamp and service message
- Auto hold and hill start assist unavailable
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0615
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- gsi.ext.gm.com/gmspo/mode6/pdf/2025/25OBDG04A.pdf
- komunikacie.uniza.sk/artkey/csl-202004-0017_functional-safety-for-developing-of-mechatronic-systems-electric-parking-brake-case-study.php
- mitsubishitechinfo.com/data/DGE/2023/06/HTML/N5060302D004PB00USA.htm
- static.nhtsa.gov/odi/tsbs/2020/MC-10172325-9999.pdf