OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0614

Right Park Brake Actuator Stuck On

C0614 is set when the right parking brake will not let go, or when the module cannot confirm that it has. To release, the motor runs in reverse; Advics treats the force as released when, after a minimum run of roughly 200 ms, the current has settled, and then lets the motor run on briefly to restore pad clearance. If that pattern never appears, or the motor stalls, the right side counts as stuck on. Bosch also uses current monitoring to spot abnormal behaviour and may command a release on its own. Causes are mostly mechanical: a seized piston or spindle nut, pads rusted to the disc after standing, or a jammed gearbox. ZF notes that the actuator must be wound back with a scan tool before service. Driving off overheats the right rear brake.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 14

Possible causes

  • Seized caliper piston or corroded spindle nut on the right side high
  • Pads rusted to the disc after the car stood for a long time medium
  • Jammed gearbox or damaged motor in the right actuator medium

Symptoms

  • Right rear brake drags; car pulls or feels held back when driving off
  • Hot right rear wheel and burning smell
  • Parking brake warning and release request not completed

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C0614

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication