OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0611

Right Park Brake Actuator Control Circuit Low

C0611 means one of the two leads to the right parking brake motor is dragged toward ground. The harness to the right rear caliper rides on the suspension and passes close to the brake disc, so chafing against the knuckle or water in the plug are the usual suspects, followed by a shorted motor. H-bridge drivers such as TI's DRV8874-Q1 sense an output tied to ground as overcurrent and switch the bridge off, which leaves the motor without drive. Hyundai's bulletin for the Ioniq hybrids names C2417, short or open on the right motor, and fits an improved extension harness on that side. No maker publishes C0611. GM once listed C0611 in its connector test bulletin PIP5094 under an older, unrelated meaning.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 11

Possible causes

  • Motor lead chafed through at the right rear knuckle or bracket high
  • Water and corrosion bridging pins in the right caliper connector medium
  • Internal short in the right actuator motor medium

Symptoms

  • Parking brake warning lamp on
  • Right side does not apply; vehicle may roll on a slope if not in Park or in gear
  • Fuse for the parking brake circuit may blow

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0611

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication