C0610
Right Park Brake Actuator Control Circuit/Open
C0610 reports that the drive circuit of the right rear parking brake motor is open, so the controller switches its bridge but no motor current flows. Mitsubishi's 2023 Outlander PHEV shows how such a check works under its own code C10B0-01: during apply or release the ABS unit looks for an open motor circuit on the right side and reacts within about one second, then suspends the electric parking brake and hill start assist. Hyundai calls the same fault C2417 on the Ioniq hybrids and replaces a connector extension harness, and GM's PIT5662A wants no more than 6 ohms per rear circuit at the EBCM. None of these makers emits C0610 itself. The right caliper cannot clamp; the left side is C060B.
Possible causes
- Right caliper motor connector unplugged, corroded or with pushed-back pins high
- Broken wire in the harness that flexes with the right rear suspension medium
- Open winding or worn brushes in the right actuator motor medium
- Blown fuse or fusible link feeding the parking brake output stage low
Symptoms
- Parking brake warning lamp and service message
- Right rear caliper neither applies nor releases electrically
- Hill start assist or auto hold unavailable
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C0610
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.