OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C060E

Left Park Brake Actuator Performance/Stuck Off

C060E is set when the left actuator is driven but does not build or keep the clamping force it should, so the brake effectively stays off. Bosch's EPB patents derive clamping force from motor current: during apply it rises as pads meet the disc and then levels off at the target force. A current that never climbs points to a slipping belt, a stripped gear or a spindle that turns without pushing the piston. FMVSS 135 tests parking brakes by holding a vehicle loaded to GVWR on a 20 % grade, so a weak left side can let the car creep. GM's PIT5662A shows that excess resistance in a rear circuit can also starve the motor. No maker publishes C060E. Expect a park brake warning and limited auto-hold.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 0E

Possible causes

  • Worn gearbox, belt or spindle inside the left actuator high
  • Pads or piston not set up correctly after brake service without maintenance mode medium
  • High resistance in the left motor circuit limits motor torque medium

Symptoms

  • Vehicle may creep on a slope with the parking brake applied
  • Park brake warning lamp or message
  • Motor noise without the usual clamping sound at the left rear

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C060E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication