OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C060B

Left Park Brake Actuator Control Circuit/Open

On motor-on-caliper parking brakes, a small DC motor drives a gear stage and a spindle that pushes the rear piston; ZF quotes up to 19 kN clamping force with its early swash plate gearbox and up to 25 kN with a two-stage planetary set for heavy vehicles. C060B means the control unit (ESC module or separate EPB module) finds the drive circuit of the left motor open: broken lead, unplugged caliper connector or burnt winding. Hyundai uses its own code C2416 for an open or shorted left motor and fixed 2019–2022 Ioniq hybrids with new connector extension harnesses; GM's PIT5662A, filed under C056D/C056E, asks for no more than 6 Ω per rear circuit measured at the EBCM. No maker publishes C060B itself. The left caliper cannot clamp.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 0B

Possible causes

  • Corroded or loose connector or extension harness at the left caliper high
  • Wire broken where the harness flexes with the suspension medium
  • Open winding in the left actuator motor medium

Symptoms

  • Red park brake lamp flashing or Service Parking Brake message
  • Left rear brake does not apply when the switch is pulled
  • Auto-hold or hill-start assist unavailable

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C060B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication