C060A
Park Brake Switch Stuck
C060A means the park brake switch reports a state that does not change when it should, or that contradicts itself: a jammed or welded contact, a button held down mechanically, or paired contacts that disagree. EPB buttons carry duplicated contacts for safety; a TRW patent notes that the controller flags an error when the paired signals do not arrive within about 30 ms, and that a blocked actuator can close just one of them. Advics counts apply and release signals seen together as a switch failure, lights a warning lamp and stores a code. Continental's design falls back to a majority vote and, while moving, chooses release over apply. No maker publishes C060A itself. The button may stop working in one or both directions.
Possible causes
- Button jammed by dirt, sticky residue or a broken housing high
- One contact of the redundant pair welded or worn medium
- Object in the console pressing the button low
Symptoms
- Park brake warning lamp or message
- Brake does not apply or release from the button
- Code returns right after clearing while the button is untouched
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for C060A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.