OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0609

Park Brake Switch Circuit

The park brake switch is the driver's apply and release button for an electric parking brake; on some cars it also reports lever or button state to other modules. C0609 covers an electrical fault in its circuit, such as an open contact, a short to ground or supply, or an unplugged connector. Continental's patent for a redundant EPB button gives each switch level its own supply and ground and measures resistor potentials to find these faults, then still reads the driver's request from the intact channel. Audi logs C060900, under the same switch title, in J623, the engine control unit of 2022–2024 Q4 e-tron models, with a drive system warning and sometimes no gear engagement; TSB 2074088 calls for a 15-minute terminal 30 reset and earth strap work.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 09

Possible causes

  • Connector at the switch or in the dash not fully engaged high
  • Poor ground or control unit software (Audi Q4 e-tron case) medium
  • Worn, contaminated or corroded switch contacts, e.g. after spilled drinks medium

Symptoms

  • Park brake or drive system warning in the cluster
  • Parking brake does not respond to the button
  • Gear selection refused in some electric models

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0609

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication