OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0608

Steering Wheel Angle Sensor Circuit Performance

C0608 covers a steering angle signal that is electrically in range but cannot be trusted: it jumps, drifts, freezes or disagrees with what yaw rate, lateral acceleration and wheel speeds imply. The Kelsey-Hayes patent rejects a centre offset that moves by more than about 15° after a dropout, and Bosch builds plausibility checks of the individual measuring channels into its GMR sensor. HELLA reminds workshops to zero the sensor after alignment or steering work, since a wrong zero point disturbs stability control. FMVSS 126 defines ESC as a system that monitors driver steering inputs, so the module switches ESC off once that input is doubtful. No maker publishes C0608; related checks are C0528, C052A and C05B2.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 08

Possible causes

  • Sensor not zeroed after wheel alignment, steering or column repair high
  • Steering wheel fitted off centre or toe out of adjustment medium
  • Worn or faulty sensor giving jumping or frozen values medium
  • Brief signal dropouts from a loose connector low

Symptoms

  • ESC lamp on, sometimes only after a few turns or straight driving
  • Unexpected ESC braking interventions
  • Steering angle not zero with the wheels pointing straight

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0608

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication