OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0605

Steering Wheel Angle Sensor Circuit/Open

The steering wheel angle sensor tells the stability system how far and how quickly the driver turns. C0605 means its circuit is open or no usable signal arrives at all: a broken supply, ground or signal wire, an unplugged connector or a dead sensor. In a Bosch patent for a PWM-output sensor, the control unit treats the signal as missing when no high level appears within one PWM period; a Kelsey-Hayes patent declares an open or short once the phase lines stay out of range for about 5 ms and blocks yaw control. Bosch's GMR sensor today sends angle and rate over CAN. No maker publishes C0605 with this meaning; GM's PI0954 used C0605 on the 2010 Buick LaCrosse for a suspension accelerometer, an unrelated older assignment.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 05

Possible causes

  • Connector at the steering column loose or not latched after airbag or column work high
  • Broken supply, ground or signal wire in the column harness medium
  • Steering angle sensor electronics failed medium

Symptoms

  • ESC/stability control warning lamp on, system off
  • Traction control and lane or parking assistants may be unavailable
  • Steering angle reads zero or not available in scan data

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0605

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication