OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0604

Active Air Dam Control Circuit Performance

C0604 is the air dam code that makers really publish: the panel does not reach or hold its commanded position even though the circuit itself looks sound. Ford stores C0604:00 in the PCM of 2021–2023 F-150s, often with a cluster warning that the air dam system has failed; its fixes are new left and right actuators for an actuator firmware issue (SSM 51718), a PCM reflash (TSB 24-2404, later 25-2155 and 25-2236) and, on 2021–2025 trucks, new bolts where the actuator-to-dam bolts broke (SSM 54705). Stellantis ties C0604 to water in the connector and to fascia contact causing a clunk at 15–35 mph, and on a 2025 Ram 1500 to impact damage, with the MIL lit. GM's patent splits such faults into sensor, actuator and panel cases.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 04

Possible causes

  • Actuator firmware or PCM software level with known false or real faults (Ford F-150) high
  • Broken bolts between actuator and air dam, panel hangs medium
  • Air dam bent, cracked or jammed after ground contact or debris medium
  • Water or corrosion in the actuator connector medium
  • Air dam lip rubbing on the front fascia low

Symptoms

  • Active Air Dam System Fault See Manual message
  • Air dam hangs down or does not retract
  • Clunk from the front end when driving at moderate speed or decelerating
  • Check engine lamp on some Ram trucks

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C0604

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication