C0603
Active Air Dam Control Circuit High
With C0603 the air dam control circuit reads above its permitted level, which points to a lead shorted to battery voltage or to another powered wire in the front-end harness. Motor driver ICs like the DRV8873-Q1 list a short to battery as a separate protected fault and disable the affected output. GM's patent on air dam self-diagnosis compares commanded position with measured position and motor current, which lets the controller tell a wiring problem from a blocked or broken panel. No maker documents C0603 publicly. Ram's X96 warranty extension for 2019 Ram 1500 trucks shows that air dam faults can light the MIL there, but that case is the lost-communication code U0645. Expect a stationary panel and a system message.
Possible causes
- Control wire shorted to a battery-fed wire in the front harness high
- Fault in the actuator electronics holding the line high medium
- Wrong pin assignment or splice after a previous bumper or harness repair low
Symptoms
- Air dam system fault message
- Air dam does not deploy at highway speed
- Possible blown fuse for the air dam circuit
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for C0603
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.