OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0602

Active Air Dam Control Circuit Low

C0602 says the control line to the air dam actuator is held below its expected voltage, most often because a motor lead touches ground or because water has bridged pins in the connector. Smart H-bridge drivers such as the DRV8873-Q1 see a grounded output as overcurrent, trip within a few microseconds and turn that half-bridge off, so the motor never gets drive. For a 2025 Ram 1500 with air dam codes, Stellantis has technicians look for corrosion, cut or chafed wires and excess resistance before replacing the dam. Ford fits separate left and right actuators on the F-150, so one side can be at fault alone. No maker documents C0602 itself. The panel stops moving and a warning text may show; high and open faults are C0603 and C0601.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number6 / 02

Possible causes

  • Actuator wire chafed through and touching the body or frame high
  • Water and corrosion in the actuator connector after a damaged seal medium
  • Shorted motor or electronics inside the actuator medium

Symptoms

  • Air dam warning message in the instrument cluster
  • Air dam stays in one position
  • Fault returns as soon as the system commands movement

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for C0602

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication