C05FE
4WD/AWD Range Actuator Position Sensor Circuit High
The range actuator position signal lies above the highest value a working sensor produces. Usual explanations are a signal line touching supply voltage, a lost sensor ground that lets the output float up, or an internal sensor fault. In a patent shared by Honda and Denso on a park-by-wire shifter, anything from 4.5 V up counts as faulty and then relies on learned values or end-stop learning to keep limited operation. Magna's transfer case sensor reports position as a duty cycle, where the same fault appears as a ratio pinned near the top. Stellantis bulletin 08-237-23 shows that a loose shift motor connector can upset several position inputs at once. No maker documents C05FE itself; C05FD covers readings that are too low.
Possible causes
- Signal wire shorted to supply or battery voltage high
- Open sensor ground medium
- Sensor output failed high medium
Symptoms
- 4WD service message, range shifts disabled
- Range display flashes or shows a wrong range
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C05FE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.