OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C05F9

4WD/AWD Range Actuator Temperature Too High

The controller has measured or estimated that the range actuator motor is too hot and blocks further shifts until it cools. Most designs model temperature from motor activity; a Denso patent for a similar shift actuator adds a fixed increment per motor start, lets the estimate decay over time and limits the motor above a protection value of 137 degrees C in its example. Ford TSB 22-2136 for 2021–2022 Bronco names C05F9:19 together with C05D9:99 in the AWD module, with the wrench lamp on and 4WD off, linked to low battery charge: test the battery, clear codes and shift through 2H, 4H, 4A and 4L. Its headline and the follow-up 22-2447 only list C05D9, so the C05F9 entry may be a typo. Stellantis reports motor overheating as its own C1444-98.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / F9

Possible causes

  • Many range shifts in a short time, motor protection active high
  • Low battery charge prolongs motor run time and current medium
  • Stiff shift mechanism or blocked shift loads the motor medium
  • Worn shift motor drawing excess current low

Symptoms

  • Message that 4WD is overheated or temporarily unavailable
  • Range shifts refused until the system cools
  • Wrench or 4WD service lamp on

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for C05F9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication