C05DC
4WD/AWD Clutch A Temperature Too High
The calculated or measured temperature of clutch A has passed the protection limit, usually after long slipping in sand, snow or while towing. Audi stores C05DC00 in the AWD control unit of quattro ultra models: in TSB 2075681/1 the technician drives circles at full lock below 10 km/h for up to 15 minutes until the yellow four-wheel drive overheating lamp comes on, then erases the entry. Suppliers protect the clutch in steps. A BorgWarner patent cuts engine torque from 130 °C and stops at 110 °C; JTEKT estimates the oil temperature from transmitted torque and speed and lowers the target torque above a threshold; GKN's actuator controller also tracks clutch temperature. After cooling, AWD normally returns.
Possible causes
- Long periods of wheel slip in deep snow, sand or mud high
- Towing or steep climbs with heavy load medium
- Different tyre sizes or wear front to rear force constant slip medium
- Aged or wrong clutch fluid low
Symptoms
- Yellow AWD overheating warning
- Less drive to the secondary axle until the clutch has cooled
- Engine power briefly reduced during wheel spin
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for C05DC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.