OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C05D7

Brake Transmission Shift Interlock (BTSI) Control Circuit

Covers the output that drives the brake transmission shift interlock, the solenoid that keeps the selector in park until the brake pedal is pressed. In the US, FMVSS 114 has required this lock since 1 September 2010 on vehicles up to 4,536 kg fitted with an automatic gearbox and a park position. A patent by Pontiac Coil shows the usual layout: a spring holds a blocking pin in the locked position, and a transistor energizes the coil only with ignition on and brake switch closed, so the system fails locked. The code points to the driver stage, wiring or coil. No manufacturer publishes C05D7; Ram logs P0928-00 for an internal BTSI fault in its rotary shifter. P081F is the signal correlation counterpart.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / D7

Possible causes

  • Interlock solenoid coil open or shorted high
  • Damaged wiring or corroded connector at the shifter medium
  • Driver stage in the shifter or body module faulty medium
  • Brake light switch signal missing, so the lock is never released low

Symptoms

  • Selector cannot be moved out of park despite pressing the brake
  • Selector leaves park without the brake applied
  • No clicking of the interlock when the brake is pressed

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for C05D7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication