C05D6
Power Steering Control Module Processor Performance
The electric power steering controller has found that its own processor, or the cross-check between its processors, is not working as expected. Toyota documents the code as C05D604 in the ECU of the EPS steering gear: 2019–2020 RAV4 and RAV4 Hybrid light the EPS warning in red or yellow at start-up or while driving (T-SB-0061-20), and the 2022 Tundra and Lexus LX 600 log it at start-up, often together with C15D704. In each case the fix is reprogramming the gear ECU with revised logic. Many EPS units pair a main and a monitoring microcontroller that must both enable the motor relay; Mando describes such a start-up check. If the self-test fails, assist is reduced or switched off, so steering becomes heavy.
Possible causes
- EPS controller software flags a false processor fault, update available high
- Supply voltage dip during engine start disturbs the self-test medium
- Internal hardware fault in the steering control module medium
Symptoms
- Red or yellow power steering warning lamp
- Steering suddenly heavier or assist reduced
- Fault appears mainly right after starting the vehicle
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C05D6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 1 affected component(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.