C05D2
Master Cylinder Piston Position Higher Than Expected
The piston has travelled further than the measured pressure justifies, a sign that fluid escapes or a sensor misreads. GM's integrated controller models the simulator pressure from pedal travel and sets C05D2 when the model exceeds the measured value by more than 20 bar (250 ms in 19OBDG03D, 500 ms in 25OBDG04B), naming master cylinder or simulator seal leakage and an in-range pressure sensor fault. The XT4 module reacts after 0.2 s when pressure lags behind the measured travel. GM bulletin 20-NA-073 (2019-2020 pickups and SUVs) lists C05D2 as excessive piston travel with loss of brake assist and fixes it by reprogramming the BSCM. Bosch and Continental patents describe the same travel-versus-pressure leak check. C05D3 is the opposite case.
Possible causes
- Brake module software issue (GM 20-NA-073, reprogramming) high
- Internal leakage at master cylinder or simulator seals medium
- Simulator pressure sensor reading too low within range medium
- Air in the hydraulic system after service low
Symptoms
- Longer, softer brake pedal with higher pedal force
- Loss of brake assist and messages in the driver information centre
- Malfunction indicator lamp on GM models
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C05D2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.