C05D1
Brake Master Cylinder Piston Position Sensor Supply Circuit
Fault on the reference supply of the master cylinder piston (pedal travel) sensor. GM's integrated brake controller provides two 5 V supplies, each feeding one pedal travel channel and one motor position channel; C05D1 covers the first (PTS1/MPS1), C05BB the second. The supply fails below 4.85 V or above 5.15 V for 100 ms; for erratic dips a counter adds 50 per sample towards 800 (fastest 80 ms) and latches until key-off. All are Type A with MIL in 19OBDG03D and 25OBDG04B. Because the motor position channel shares the feed, motor sensor codes can appear at the same time. Tracking regulators such as the TI TPS7B4253-Q1 show how such off-board sensor supplies are built and protected.
Possible causes
- Supply line shorted to ground or to another voltage high
- Pedal travel or motor position sensor loading the supply medium
- Supply circuit on the control module board defective medium
Symptoms
- Malfunction indicator lamp, brake warning and loss of assist
- Further codes for pedal travel and motor position sensors
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C05D1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.