OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C05D0

Brake Master Cylinder Piston Position Sensor A/B Correlation

Both travel channels are individually plausible, but they disagree with each other. GM's integrated controller votes two out of three: PTS1, PTS2 and a third travel estimate (BAS); if PTS1 and PTS2 differ by more than 2 mm and one of them also deviates from the third value by over 2 mm, that channel is declared failed after 100 ms. The XT4 booster module allows 2.71 mm, the 23OBDG07 and 25OBDG03B tables 1.5 mm, each for 0.12 s with both channels initialised and otherwise fault-free; all Type A with MIL. Continental describes pedal modules with two travel sensors precisely so a single bad one can be identified. Loose sensor mounting, contamination and connector faults on one channel are typical causes. C05CC/C05CF cover each channel alone.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / D0

Possible causes

  • One sensor channel drifting away from the other high
  • Mechanical play at the sensor or input rod medium
  • Contact resistance on one channel only medium

Symptoms

  • Malfunction indicator lamp and brake warning
  • Brake system switches to reduced mode, regeneration may be off

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C05D0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication