C05CF
Brake Master Cylinder Piston Position Sensor B Circuit Range/Performance
Plausibility fault on channel B (GM: PTS2) while its signal is electrically in range. GM's integrated controller with pedal simulator runs the same checks on B as on A: more than 38 mm of travel, a step faster than 700 mm/s that disagrees with channel A and the simulator pressure model, or an offset beyond 2.5 mm, all with 100 ms and Type A. In the booster-type units the B offset with released pedal is limited to 0.9 mm (XT4) or +1.1/-1.5 mm (2023/2025 tables). Wards reported that this vacuum-free ZF system for GM full-size trucks reads the driver's braking wish from a pedal sensor, so a bad channel directly affects brake request. C05CC handles channel A, C05D0 the A/B comparison.
Possible causes
- Offset of sensor B outside the allowed range high
- Loose contact causing implausible jumps on channel B medium
- Sensor rod or mounting worn or bent medium
Symptoms
- Malfunction indicator lamp and brake warning
- Pedal feels different, assist may be reduced
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C05CF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.