C05CE
Brake Master Cylinder Piston Position Sensor B Circuit Voltage Low
Here the second, PWM-coded output (channel B) of the piston travel sensor stays permanently low. GM's XT4 brake module and the later 23OBDG07 and 25OBDG03B tables interpret a constant low level for 0.2 s as the signal line shorted to ground, Type A, one trip, MIL. Because a PWM line at 0 V also results when the sensor loses its supply or ground, a dead channel B together with a working channel A suggests a wiring fault close to the second output, while both channels failing hints at the shared supply (C05D1). The module can usually still brake with channel A, but with less redundancy. Inspect the harness at the booster for crush or water damage before condemning the unit. C05CD is the stuck-high case.
Possible causes
- PWM signal line shorted to ground high
- Sensor channel B without supply or ground medium
- Output stage of channel B failed low medium
Symptoms
- Malfunction indicator lamp, brake system warning
- Possibly reduced assist or regeneration off
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C05CE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.