C05CB
Brake Master Cylinder Piston Position Sensor A Circuit Voltage Low
Mirror image of C05CA: channel A of the master cylinder piston travel sensor reports that its value fell below the permitted range. GM documents it for its booster-type EBCMs, where the linear position sensor encodes travel digitally and flags its own low limit violation: the XT4 module acts after 0.033 s on the SENT fast channel, while the 2023 and 2025 tables wait 0.96 s for the slow-channel status, Type A, one trip, MIL. A low report often follows a sensor that loses its magnet reference or sees a sagging supply. Bosch builds such travel sensors around a Hall element that tracks a magnetic field over up to 45 mm of rod stroke. If the code returns after wiring checks, the sensor is usually part of the booster unit and replaced with it.
Possible causes
- Position sensor A reporting out-of-range low high
- Sagging sensor supply voltage medium
- Magnet carrier loose or damaged low
Symptoms
- Malfunction indicator lamp and brake system message
- Brake assist reduced, regeneration possibly off
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C05CB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.