OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C05C7

Brake Pressure Sensor F Circuit High

Here the voltage of pressure sensor F rises above the top of its measuring range. With the common pull-down input, Denso explains that a lost sensor ground lifts the output past 4.7 V, which lies in the upper fault band; a short of the signal to a voltage source has the same effect. Industrial sensors such as the Honeywell MIP series deliberately park their output near 97.5 % of supply to signal an internal fault or overpressure. Saab/GM detects a short to voltage on the brake pressure signal or reference within 0.1 s. No carmaker documents C05C7 for sensor F. Check the ground wire first, then insulation of the signal line. C05C6 is the low counterpart, C05C5 the in-range plausibility fault.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / C7

Possible causes

  • Open or high-resistance sensor ground high
  • Signal wire shorted to a voltage source medium
  • Sensor F reporting an internal fault at the upper rail medium

Symptoms

  • ABS/ESC lamp on, stability functions switched off
  • Live data shows implausibly high brake pressure with pedal released

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C05C7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication