OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C05C2

Brake Booster Motor A Over Temperature

The electric booster or integrated brake unit has found its drive motor A, or the power stage feeding it, too hot. GM uses the code in several EBCM tables, all Type A with MIL: one design trips above 154 °C estimated motor temperature or on a bridge driver over-temperature shutdown, the Cadillac XT4 unit above 120 °C and 142 °C rotor/ECU temperature, 23OBDG07 and 25OBDG03B also when torque limiting stops the plunger refill, and 25OBDG04B above 140/160 °C magnet or 210/240 °C winding temperature. Mitsubishi lists C05C2 for Outlander PHEV code C18E1-4B with MIL after two trips, although that page describes a missing supply to the stroke sensor. Expect reduced boost after long or repeated hard braking. C0594 covers motor performance.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / C2

Possible causes

  • Long downhill braking or repeated hard stops overheating the motor high
  • Hydraulic fault making the motor run longer than normal medium
  • Power stage or bridge driver reporting false or real over-temperature medium
  • Low supply voltage forcing current limitation low

Symptoms

  • Malfunction indicator lamp and brake warning on GM models
  • Reduced brake assist, pedal feels harder
  • Regenerative braking temporarily disabled

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C05C2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication