C05C1
Brake Pedal Position Sensor B Not Learned
Set when the second, redundant channel B of the brake pedal position sensor lacks a stored zero point. Many electric and hybrid brake pedals read travel twice so that one channel can cross-check the other; Bosch builds such pedal travel sensors with a magnetic field sensor and two redundant outputs. Without a learned rest value for B, that cross-check is lost even when channel A is fine. No manufacturer publishes C05C1. GM handles the comparable fault as C0277-4B and simply recalibrates, and Hitachi only accepts a new zero if the complete learn run finished without pedal input. After fitting a new pedal sensor or control unit, run the learn with the pedal fully released. C05C0 is the twin for channel A, C061A the offset-limit fault.
Possible causes
- Channel B not learned after a repair or software update high
- Learn conditions not met (pedal pressed, vehicle rolling) medium
- Channel B of the pedal sensor faulty or out of tolerance medium
Symptoms
- Brake warning lamp or service message
- Reduced redundancy, some assist or regeneration functions disabled
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for C05C1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.