C05BF
Brake Booster Motor B Position Sensor Supply Circuit Range/Performance
C05BF concerns a motor B sensor supply that stays inside its hard limits but behaves implausibly – it fluctuates, disagrees with the independent monitor, or does not match the first supply. No manufacturer documents C05BF publicly. GM's comparable check for its own two supplies, filed under C05BB and C05D1, shows the principle: brief excursions outside 4.85–5.15 V are weighted and accumulated, while good samples slowly reverse the count, so only a persistent disturbance latches. Hitachi Astemo chooses non-overlapping A/D windows of 475–575 and 699–849 counts for reference and monitor signals so that even a stuck comparator input is caught. A supply that drifts or ripples can corrupt the rotor angle without tripping simple low or high checks, so the module treats channel B as unreliable.
Possible causes
- Intermittent contact or corrosion in the motor B sensor supply wiring high
- Unstable sensor supply regulator or failing filter capacitor in the control unit medium
- Fault in the supply monitoring circuit itself low
Symptoms
- Brake warning lamp appearing at times
- Assist occasionally reduced, code returns after clearing
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C05BF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.