C05B9
Brake Booster Motor A Position Sensor Supply Circuit Low
C05B9 is set when the feed voltage for motor A's position sensor sags below its lower limit. No manufacturer publishes C05B9; as a reference point, GM's 2019 brake module calls its 5 V sensor supplies low below 4.85 V lasting 100 ms, but books that under C05D1 or C05BB. A low supply usually means the line is shorted to ground or a sensor is drawing too much current. Supplies of this kind are often tracking regulators such as TI's TPS7B4253-Q1, built for sensors on long cables: the output is short-proof to ground and current-limited at typically 450 mA, so instead of failing it lets the voltage collapse. Since the same rail can also feed pedal sensors, related codes may appear together. Motor commutation becomes unreliable and assist is reduced or removed.
Possible causes
- Supply line chafed through and shorted to ground high
- Defective position sensor or another sensor on the same rail loading the supply medium
- Weak sensor supply regulator in the control unit low
Symptoms
- Brake warning lamp, often with several sensor codes at once
- Brake pedal feels hard, assist reduced
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for C05B9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.