OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C05B1

Brake Hydraulic Circuit D Leak

C05B1 is the leak code for hydraulic circuit D. The only public maker use is GM's hybrid brake controller of 2016–2019, where it covers the rear axle circuit. Two checks feed it: during pressure hold phases with the pump off and the car at rest, a calculated rear leakage above 0.3 ml/s, judged over more than 300 s of cumulative braking; and, with more than 5,000 kPa at the front axle and a steady pedal for 3 s, a master cylinder pressure lower than the rear axle pressure. Type A, MIL after one trip. Its partner C05B0 covered the front axle there. A Continental patent shows another approach: build pressure with a motor-driven plunger and judge tightness from the slope of the pressure decay. FMVSS 135 demands a red warning on major fluid loss. Inspect lines, rear calipers and the hydraulic unit.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / B1

Possible causes

  • Fluid leak at a rear brake line, hose or caliper high
  • Internal leakage of an inlet or outlet valve in the hydraulic unit medium
  • Air in the rear circuit after service medium

Symptoms

  • Brake and ABS warning lamps on, MIL possible
  • Longer pedal travel and weaker rear braking

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C05B1

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication