OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C05B0

Brake Hydraulic Circuit C Leak

C05B0 reports lost fluid or volume in a hydraulic circuit the maker designates C; at GM its meaning has changed over time. GM's 2016–2019 hybrid brake controllers used it for the front axle circuit: wheel behaviour not matching vehicle deceleration during ABS or EBD for 1 s, or master cylinder pressure above rear axle pressure at constant pedal. A 2019 EBCM with integrated booster flags dynamic leaks when a pressure error integral passes 20 bar. In GM's 2023 and 2025 tables C05B0 means air in the plunger circuit: a volume deviation over 2 cm³ during replenishment, or over 1.5 cm³ in the other tests. All Type A with MIL. GM bulletin 22-NA-247 warns of false C05B0 on eBoost models after pad work; pump the pedal firm before clearing. On 2019 Silverado/Sierra it came with Service Brake Assist.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / B0

Possible causes

  • Caliper pistons pushed back during pad work and not reseated before driving (GM 22-NA-247) high
  • Air in the plunger or brake circuit after service or bleeding high
  • Real fluid leak at a line, hose, caliper or valve medium
  • Brake module software calibration causing false detection (GM PIT5638) low

Symptoms

  • Service brake assist or brake system message, brake warning lamp
  • Longer or softer pedal travel
  • MIL on (GM)

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C05B0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication