OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C05AE

ABS Pump Motor Calibration Not Learned

C05AE means the brake module lacks a valid zero calibration for the measuring channels of its pump motor. In GM's 2016 and 2019 hybrid brake module (BSC1) the motor voltages are read through a sigma-delta modulator that needs a 0 V calibration; with the ignition on, more than 6.9 V system voltage and the pump off, the code sets if the raw generator voltage reading falls outside 14–23.8 or the drop across the pump relay outside 13–18, for 3 s. A second test flags supply undervoltage: shunt voltage under 7.5 V or relay drain voltage outside 1.5–3 V for 2 s. Type A with MIL; the check passes after 20 s of driving above 18.6 mph. Such offset calibration is standard for delta-sigma converters, as TI's ADS131M04 data sheet shows.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / AE

Possible causes

  • Stored zero calibration missing or invalid after module replacement or programming high
  • Low or unstable supply voltage during the calibration medium
  • Pump motor relay or shunt in the module out of tolerance medium

Symptoms

  • ABS and brake warning lamps plus check engine lamp
  • ABS or stability functions limited until the calibration succeeds

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C05AE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication