OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C05AD

Brake Blending System Performance

C05AD is the overall check of a blended brake: does the hydraulic pressure built by wire match what the controller asked for? GM's 2016 and 2019 hybrid tables (brake module BSC1) compare actual and target boost-piston pressure, for the by-wire side as well as the master cylinder side: more than 4,000 kPa too high points to a false high sensor value, more than 1,500 kPa too low to a low sensor value, an empty accumulator, a weak pump, air or a leak. It sets within 0.5–1 s, Type A with MIL. GM proves the repair by driving to about 25 mph and braking gently at around 3,000 kPa rear pressure twice. Bosch notes that blending generator and hydraulic braking is a core job of brake-by-wire, and Ford Otosan's patent compensates regeneration gaps with friction braking.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / AD

Possible causes

  • Brake pressure sensor reading too high or too low high
  • Low accumulator pressure or weak hydraulic pump medium
  • Air in the hydraulic circuit after service medium
  • External or internal leak in the brake hydraulics low

Symptoms

  • Brake warning and check engine lamps
  • Soft or inconsistent pedal, braking stronger or weaker than expected
  • Regenerative braking reduced

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for C05AD

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication