OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C05AA

ABS Pump Motor Temperature Too High

C05AA signals that the ABS return or high-pressure pump motor, or its switching stage, has become too hot. Few units have a sensor on the motor, so the temperature is usually modelled. A Kelsey-Hayes (now ZF) patent estimates the heat of the transistor that drives the pump from separate heating and cooling curves, starting from the module's ambient sensor; above a limit of about 90–150 °C (60–110 °C in deep cold) the pump is disabled until the estimate falls below a lower threshold, optionally with a warning lamp. Bosch describes a staged response in an electrohydraulic brake: as limits are passed, heat-producing functions are cut back down to the mechanical fallback. Long ABS or stability events, hot climates and a stiff pump favour it. No manufacturer publishes C05AA.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / AA

Possible causes

  • Long ABS, traction or stability interventions, e.g. on rough or slippery roads high
  • Stiff pump or worn motor brushes raising current and heat medium
  • High under-hood or ambient temperature medium
  • Module ambient sensor or temperature model giving false values low

Symptoms

  • ABS or stability control temporarily unavailable
  • ABS or brake warning lamp on, often clearing after cooling down

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for C05AA

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication