OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C05A9

ABS Pump Motor Supply Voltage Circuit A/B Correlation

With two feeds for the pump motor, the module can compare them: both come from the same vehicle supply and should read almost alike. C05A9 is set when the two drift apart beyond the allowed margin, even though each may still lie in its own window. A Hitachi patent for electric brakes uses this idea: the control unit compares the voltages of several branch supply lines and, if the largest difference exceeds a limit, concludes that a main line is broken and switches in a backup path. Hyundai Mobis gives each winding of a dual brake motor its own power module and supply input, and Ipgate runs its brake-by-wire electronics on two redundant supplies. No maker documents C05A9 publicly. Likely causes are a high-resistance connection in one feed or a measuring error in the module.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / A9

Possible causes

  • Corroded terminal, fuse or connector in only one of the two feeds high
  • Voltage measurement channel in the brake module drifting medium
  • Poor ground affecting only one supply path low

Symptoms

  • ABS/ESC or brake system warning lamp on
  • Pump operation or brake redundancy restricted

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C05A9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication