OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C05A5

ABS Pump Motor Supply Voltage B Circuit/Open

Supply B is a second power feed for the pump motor of the brake unit; C05A5 reports it as missing or open. A second feed is found where the motor or its drive is built redundantly. Hyundai Mobis patents a brake motor with two windings, each with its own power module and own supply input from the battery; if one side fails it is shut off and the other carries the full current. Ipgate describes a brake-by-wire drive with two three-phase strands and electronics on two redundant voltage supplies. No maker documents C05A5 publicly. Mitsubishi's 2023 Outlander PHEV shows the usual single-feed layout: 60 A fusible link to the motor, 10–16 V at the connector. Feed A has its own code C052F. Depending on design, the pump runs on with reduced power or brake functions are cut back.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / A5

Possible causes

  • Blown fuse or fusible link in the B supply high
  • Open wire or loose terminal in the B feed to the brake unit medium
  • Internal fault in the second power stage of the brake module low

Symptoms

  • ABS/ESC or brake system warning on
  • Reduced pressure build-up or loss of redundancy message

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for C05A5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication