OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C05A4

Wheel Speed Sensors Supply Circuit Low

The shared feed for the active wheel speed sensors is too low for them to work. In GM's hybrid tables of 2016 and 2019 the brake controller measures, via an internal comparator, the voltage between the sensor supply line and the signal line and sets C05A4 below 6.7 V for 0.06 s while system voltage is above 6.9 V, Type A with MIL; it also blocks the single-wheel codes such as C0500–C0504. A 2019 GM EBCM reads the supply through its ASIC, on units without a regulated sensor feed also against the 12 V input, and sets the code within 15 ms. Allegro's sensor IC needs at least 4 V, or 5.2 V for one variant. On the 2021 Jeep Wrangler 4xe a weak 12 V battery set C05A4 together with other low-voltage codes and a MIL; the fix was to charge, test and replace the battery (08-106-21). Check battery and charging before parts.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / A4

Possible causes

  • Discharged or failing 12 V battery (FCA 08-106-21) high
  • Wheel speed sensor wiring shorted to ground, pulling the shared supply down medium
  • Sensor supply stage inside the brake module failing low

Symptoms

  • ABS, traction and stability control lamps on, MIL possible
  • Several wheel speed codes at once, often with low-voltage codes
  • Hard starting or no start when the 12 V battery is the cause

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for C05A4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication