C059D
Brake Pressure Sensor D Missing Calibration
C059D flags missing calibration data for a fourth hydraulic pressure sensor. No manufacturer publishes this code. Where the letter D appears elsewhere, GM's 2016 hybrid brake controller uses it for the rear-left wheel pressure sensor (C0575–C0578), yet reports that sensor's calibration fault as C059B; the letters of the calibration codes therefore follow each maker's own list. Mitsubishi's 2023 Outlander PHEV has a comparable fault without SAE number, C105E-92 for an uncalibrated pressure sensor, detected within 1 s, and tells technicians to clear a merely stored code instead of replacing the unit. A Bosch patent describes resetting an offset fault only after a successful check while driving. Practically, the module limits ABS/ESC functions until the scan tool calibration has passed.
Possible causes
- Calibration of the sensor not done after hydraulic unit or module replacement high
- Code stored from an earlier event, sensor already calibrated medium
- Brake module losing calibration data in its memory low
Symptoms
- ABS and ESC warning lamps on
- Brake pressure based functions such as hill hold or brake blending limited
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C059D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.