OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C059B

Brake Pressure Sensor B Missing Calibration

The brake module cannot confirm that pressure sensor B has been calibrated and that its sensitivity is right. GM uses C059B in the brake controller of its 2016 and 2019 hybrid tables for the rear-left wheel pressure sensor: during a test pulse the sensor response must stay between 90 % and 110 %, checked only after at least one completed offset learn, with low master cylinder pressure and no ABS, traction or stability intervention. Type A, MIL after one trip; to confirm a fix, drive above about 6 mph for a minute without braking. In those same tables the rear-left sensor's circuit faults use C0575–C0578. A Bosch patent likewise treats a failed test pulse as a sensitivity fault with ABS and ESC lamps on. Ford checks sensor data by checksum and ID, but only for sensor A (C0560).

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 9B

Possible causes

  • Pressure sensor responding outside the allowed test-pulse window medium
  • Calibration or offset learn not completed after module or hydraulic unit replacement high
  • Brake control module storing or evaluating calibration data incorrectly low

Symptoms

  • ABS and stability control warning lamps on, MIL possible
  • Regenerative braking blending or ESC functions restricted

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for C059B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication