OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C059A

Power Steering Control Module - Rear Missing Calibration

C059A concerns active rear-axle steering: its control module lacks the calibration it needs to position the rear wheels. Systems like ZF's AKC turn the rear wheels by a few degrees with an electrically driven spindle, either through one central actuator or one per wheel. A Magna patent shows what has to be calibrated: a coarse absolute travel sensor and a fine rotor sensor are referenced to the geometric centre between both mechanical end stops, and these values are stored so the actuator can return to straight-ahead. Without them the module cannot hold the rear wheels centred and disables rear steering. No maker documents C059A publicly. GM names the part K92 Rear Power Steering Control Module; on the 2024 Hummer EV it stopped working after vehicle-wide programming until authentication was repeated (PIT6350), logged as U3000/U1961/U1962.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 9A

Possible causes

  • Rear steering module or actuator replaced without centre calibration high
  • Programming or setup after a software update not completed medium
  • Suspension or alignment work requiring a new rear steering zero point medium
  • Low 12 V supply interrupting the calibration routine low

Symptoms

  • Rear steering warning in the cluster and rear wheel steering inactive
  • Larger turning circle and changed handling at speed
  • Steering wheel slightly off centre on straight roads

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for C059A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication