OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0598

Brake System Control Module B Performance

C0598 is the same summary check for a second brake control module, B. Such a module is found where braking is split between two units: Bosch gives its integrated power brake a separate backup unit for automated driving, so the vehicle still stops if the main unit fails. A BWI patent describes such a backup unit with its own control unit, motor and pumps for the front axle, linked to the main unit over a private CAN line and taking over pedal boost in the fallback mode. C0598 reports that unit B fails its internal checks. No manufacturer documents C0598 publicly; Toyota's use of C0597 for control module A shows the lettering. Redundancy or assist is reduced while it is stored.

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 98

Possible causes

  • Software or calibration fault in brake module B medium
  • Power supply or ground problem of module B medium
  • Internal hardware fault of module B medium
  • Fault on the link between the two brake modules low

Symptoms

  • Brake system warning message
  • Driver assistance or automated driving functions unavailable
  • Reduced brake assist if the module handles boosting

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for C0598

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication