OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Chassis generic / SAE

C0597

Brake System Control Module A Performance

C0597 is a summary code for the first brake system control module: it cannot carry out its function properly, and the failure type byte narrows the cause. Toyota uses C059746 (calibration or parameter memory) on 2020–22 Corolla, Corolla Cross and RAV4 with a parking brake warning, cured by reprogramming the skid control unit (T-SB-0078-21), and C059704 (internal failure) on the 2022–23 Tundra, covered by a software campaign. Stellantis asks for current software before an ABS module and booster are replaced for C0597-00 on the 2021–22 Grand Cherokee and 4xe. On 2026 GM full-size SUVs C0597 replaced C055F: a Service Brake System message led to a new master cylinder (PIT6450A), and cold-weather cases trace to weak battery voltage (PIT6476).

SystemChassis
Typegeneric / SAE
GroupC0
Range / number5 / 97

Possible causes

  • Outdated or corrupted brake module software or calibration data high
  • Low battery voltage or poor power and ground connections, especially in cold medium
  • Internal fault of the brake control unit or integrated master cylinder medium

Symptoms

  • Service Brake System or parking brake malfunction message
  • ABS, stability control and possibly check engine lamps on
  • Changed brake pedal effort

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for C0597

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication