C0594
Brake Booster Motor A Performance
C0594 judges whether booster motor A moves as commanded, not its wiring. GM's 2016/2019 hybrid booster flags a motor turning against the commanded direction (under 15 rad/s while more than 25 rad/s is requested), more than seven direction reversals, oscillation with the brake applied, or unintended backward rotation above 40 rad/s. In the XT4 unit and the 2023/2025 EBCM tables the plunger must reach its end position at start-up; the code also sets if the motor test finds a hardware fault, if pressure sensor 2 stays at or below 10 bar while the motor moves, or if modelled and measured pressure differ by over 40 bar for 0.2 s. All Type A with MIL. Mitsubishi files C18E1-49 (motor not operating normally) of the Outlander PHEV as C0594 with MIL.
Possible causes
- Binding gear, spindle or plunger inside the booster high
- Worn or damaged booster motor A medium
- Air or leakage in the hydraulic circuit so pressure does not follow motor travel medium
- Faulty rotor position feedback causing wrong direction or oscillation low
Symptoms
- Loss of brake assist with a heavy pedal
- Check engine and brake warning lamps on
- Booster noise or pedal vibration before the fault sets
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for C0594
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.